Default Ieee 802.1X Authentication Configuration - Cisco Catalyst 3120 Software Manual

Chapter 9 Configuring IEEE 802.1x Port-Based Authentication
•
•
•
•
•
•

Default IEEE 802.1x Authentication Configuration

Table 9-2
Table 9-2
Feature
Switch IEEE 802.1x enable state
Per-port IEEE 802.1x enable state
AAA
RADIUS server
•
•
•
Host mode
Control direction
Periodic re-authentication
Number of seconds between
re-authentication attempts
Re-authentication number
Quiet period
Retransmission time
Maximum retransmission number
OL-12247-01
Configuring IEEE 802.1x Authentication with WoL, page 9-39
Configuring MAC Authentication Bypass, page 9-40
Configuring NAC Layer 2 IEEE 802.1x Validation, page 9-41
Configuring Web Authentication, page 9-42
Disabling IEEE 802.1x Authentication on the Port, page 9-44
Resetting the IEEE 802.1x Authentication Configuration to the Default Values, page 9-45
shows the default IEEE 802.1x authentication configuration.
Default IEEE 802.1x Authentication Configuration
IP address
UDP authentication port
Key
(optional)
Default Setting
Disabled.
Disabled (force-authorized).
The port sends and receives normal traffic without IEEE
802.1x-based authentication of the client.
Disabled.
None specified.
•
• 1812.
• None specified.
Single-host mode.
Bidirectional control.
Disabled.
3600 seconds.
2 times (number of times that the switch restarts the
authentication process before the port changes to the
unauthorized state).
60 seconds (number of seconds that the switch remains in
the quiet state following a failed authentication exchange
with the client).
30 seconds (number of seconds that the switch should
wait for a response to an EAP request/identity frame
from the client before resending the request).
2 times (number of times that the switch will send an
EAP-request/identity frame before restarting the
authentication process).
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
Configuring IEEE 802.1x Authentication
(optional)
(optional)
(optional)
(optional)
9-23