Displaying Etherchannel Traffic Statistics - Cisco WS-C4003 - Catalyst 4000 Chassis Switch Software Configuration Manual

Configuring EtherChannel
3/5
3/6
----- -------- -------- --------
Port
----- -------- ------------ ----------
3/5
3/6
----- -------- ------------ ----------
Port
----- -------- ------------- ---------
3/5
3/6
----- -------- ------------- ---------
Port
----- ------ ------ ------------ ----------
3/5
3/6
----- ------ ------ ------------ ----------
Console> (enable)

Displaying EtherChannel Traffic Statistics

To display EtherChannel traffic statistics, perform this task in privileged mode:
Task
Display EtherChannel traffic statistics.
This example shows how to display EtherChannel traffic statistics information for EtherChannel ID 835:
Console> show channel 835 mac
Channel
-------- -------------------- -------------------- --------------------
835
Channel
-------- -------------------- -------------------- --------------------
835
Channel
-------- -------------------- --------------------
835
Channel
-------- ---------- ---------- ---------- ---------- ---------- ----------
835
Console> (enable)
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
6-10
on auto-on auto-on
on auto-on auto-on
GMRP GMRP GMRP
status registration forwardAll
enabled normal disabled
enabled normal disabled
GVRP GVRP
status registeration applicant
disabled normal
disabled normal
Qos-Tx Qos-Rx Qos-Trust
- - untrusted
- - untrusted
Rcv-Unicast
0
Xmit-Unicast
0
Rcv-Octet
11283708
Dely-Exced MTU-Exced
0
Chapter 6 Configuring Fast EtherChannel and Gigabit EtherChannel
GVRP
normal
normal
Qos-DefCos
0
0
Command
show channel [channel_id] mac
Rcv-Multicast Rcv-Broadcast
119200
Xmit-Multicast Xmit-Broadcast
184171
Xmit-Octet
14942104
In-Discard Lrn-Discrd In-Lost
0 0 0
0
0
Out-Lost
0 0
78-12647-02