Displaying The Contents Of A File On A Flash Device; Copying Files - Cisco WS-C4003 - Catalyst 4000 Chassis Switch Software Configuration Manual

Software guide
Table of Contents

Advertisement

Using the Flash File System
This example shows how to list the files on the default Flash device:
Console> (enable) dir
-#- -length- -----date/time------ name
1
2
3795052 bytes available (7608212 bytes used)
Console> (enable)
This example shows how to list the deleted files on the default Flash device:
Console> (enable) dir deleted
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .D ffffffff 81a027ca
4.1.98.cfg
2 .D ffffffff ccce97a3
.config.cfg
3 .D ffffffff 81a027ca
1213952 bytes available (6388224 bytes used)
Console> (enable)

Displaying the Contents of a File on a Flash Device

In software release 5.2 and later, you can display the contents of a file on a Flash device onscreen. Use
the dump keyword to display a hex dump of the file.
To display the contents of a file on a Flash device, perform this task in privileged mode:
Task
Display the contents of a file on a Flash device.
This example shows how to display the contents of a file in bootflash:
Console> (enable) show file bootflash:dns_config.cfg
begin
!
#dns
set ip dns server 172.16.10.70 primary
set ip dns server 172.16.10.140
set ip dns enable
set ip dns domain corp.com
end
Console> (enable)

Copying Files

Use the copy command to perform these tasks:
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
30-4
3846376 Jun 14 2000 14:13:10 cat4000-k4.6-1-0-104-ORL.bin
3761580 Jun 14 2000 14:16:05 cat4000.6-1-0-104-ORL.bin
Download a system image or configuration file from a TFTP or rcp server to a Flash device
Upload a system image or configuration file from a Flash device to a TFTP or rcp server
Configure the switch using a configuration file on a Flash device or on a TFTP or rcp server
Copy the current configuration to a Flash device or to a TFTP or rcp server
41bdc
22
7004 Apr 01 1998 15:27:45 4003.config.
43644
23
6630 Apr 01 1998 15:36:47 4003.default
45220
15
7004 Apr 19 1998 10:05:59 4003_config.cfg
Command
show file [device:]filename [dump]
Chapter 30
Using the Flash File System
78-12647-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 4000 seriesCatalyst 2948gCatalyst 2980g

Table of Contents