Configuring the SPA932 Attendant Console
Monitoring the SPA932
Cisco SPA and Wireless IP Phone Administration Guide
SPA932 Unit Monitoring Notes
The following table describes each parameter; both units display the same
parameters.
Parameter
Unit Enable
Subscribe Expires
HW Version
Unit Online
Subscribe Retry Interval
SW Version
Key Name
Type
Line
Station
Subscribe
Description
Displays if the Unit is enabled or disabled.
Displays when the current subscription expires. After
the subscription expires, the SPA932 automatically
requests a new subscription.
Displays the version of the hardware.
Displays whether the unit is connected or not.
Displays the length of time the SPA932 waits to try
again if subscription fails.
Displays the version of the software currently running
on the unit.
Displays the name assigned to each key (1-32) on the
SPA932 attendant console unit.
Displays the function enabled for each key (1-32) on the
SPA932 attendant console unit.
Displays the extension assigned to each key (1-32) on
the SPA932 attendant console unit.
Displays the subscribe URI configured for each key (1-
32) on the SPA932 attendant console unit.
Displays the subscription status of the unit/key. The
value can be Yes, Fail, or No. No indicates that the
feature/function (fnc) of that line does not require a
subscription (such as speed dial).
9
185