Configuring the SPA932 Attendant Console
NOTE
Cisco SPA and Wireless IP Phone Administration Guide
The SPA93 is a 32-button attendant console for the SPA962 or SPA525G. This
section applies only to SPA962 and SPA525G phones with SPA932 attendant
console attachments.
The SPA932 cannot be used with a SPA525G if the SPA525G is part of a Cisco
Unified Communications 500 Series for Small Business system.
The SPA932 connects to the phone with the attachment arm provided (not shown).
It obtains power directly from the phone and does not require a separate power
supply. Two SPA932 units can be attached to a single phone to monitor a total of
64 separate lines.
For more information about installing and configuring the SPA932 with a Cisco
SPA9000 system, see the
Configuration Guide
.
This chapter contains the following sections:
•
Configuring the SPA9000 for the SPA932, page 176
•
Configuring the BroadSoft Server for the SPA932, page 176
•
Configuring the Asterisk Server for the SPA932, page 177
•
Configuring the SPA932, page 178
•
Unit/Key Configuration Scripts, page 179
•
SPA932 Parameter Notes, page 183
•
Monitoring the SPA932, page 184
Cisco SPA9000 Voice System Installation and
9
173