Cisco SPA942 - - IP Phone Administration Manual page 168

8
166
Configuring Regional Parameters and Supplementary Services
Field Description
Set Local Date Enter the local date (
(mm/dd) the day). The year is optional and uses two or four digits. For
example,
May 1, 2008, can be entered as:
05/01 or 05/01/08 or 05/01/2008
Set Local Time Enter the local time (
(HH/mm) minutes). Seconds are optional.
Time Zone Selects the number of hours to add to GMT to generate the local
time for caller ID generation. Choices are GMT-12:00, GMT-
11:00,..., GMT, GMT+01:00, GMT+02:00, ..., GMT+13:00.
Defaults to GMT-08:00.
Time Offset (HH/ This specifies the offset from GMT to use for the local system
mm) time.
Daylight Saving Enter the rule for calculating daylight saving time. See the
Time Rule "Configuring Daylight Savings Time" section on page
Daylight Saving Select yes to enable or no to disable DST on the SPA9x2. This
Enable setting affects all lines (extensions) on the phone.
Dictionary Server Defines the location of the dictionary server, the languages
Script available and the associated dictionary. See the
Dictionary Server Script" section on page
Language Specifies the default language. The value must match one of the
Selection languages supported by the dictionary server. The script (dx
value) is as follows:
<Language_Selection ua="na">
</Language_Selection>
Defaults to blank; the maximum number of characters is 512. For
example:
<Language_Selection ua="na"> Spanish
</Language_Selection>
mm
represents the month and
hh
represents hours and
Cisco SPA and Wireless IP Administration Phone Guide
Localizing Your IP Phone
dd
represents
mm
represents
167.
"Creating a
171.