SPA and Wireless IP Phone Field Reference
System Tab
NOTE
Cisco SPA and Wireless IP Phone Administration Guide
VLAN Settings
Not applicable to the WIP310.
Parameter
Enable VLAN
VLAN ID
Enable CDP
Wi-Fi Settings (SPA525G only)
Parameter
SPA525-wifi-on
Bluetooth Settings (SPA525G only)
Parameter
Enable BT
SPA525-readonly
Description
Enable this parameter if the switch to which the Cisco
IP phone is connected uses VLAN tagging.
Enter the VLAN tag for the VLAN to which the Cisco IP
phone is assigned. This should be the same VLAN to
which the SPA9000 is assigned.
Enables or disables Cisco Discovery Protocol (CDP).
Defaults to Yes.
Description
Set to yes to enable Wireless-G service on the
SPA525G.
Description
Set to yes to enable support for Bluetooth devices on
the SPA525G.
If set to yes, the Wi-Fi settings on the phone are read
only. If set to no, the Wi-Fi settings on the phone can
be changed by the end user.
B
201