Cisco SPA942 - - IP Phone Administration Manual page 130

6
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
128
Click the System tab.
Configure the following fields:
• Static IP Address—Enter the static IP address of the phone.
• Netmask—Enter the subnet mask of the phone.
• Gateway—Enter the IP address of the gateway.
For the SPA525G, you also have the following fields available:
• LAN MTU—LAN Maximum Transmission Unit size. Default value: 1500.
• Duplex Mode—Choose one of the following to configure the speed/duplex
for the phone's Ethernet ports:
- Auto
- 10MBps/Duplex
- 10MBps/Half
- 100Mbps/Duplex
- 100MBps/Half
Click Submit All Changes.
Configuring PPPoE Settings
If you configured PPPoE as the internet connection type:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the System tab.
Configure the following fields:
Parameter
PPPoE Login Name
Configuring Security, Quality, and Network Features
Configuring Domain and Internet Settings
Description
Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Cisco SPA and Wireless IP Phone Administration Guide