Cisco SPA525G Quick Start Manual

Vpn status

Hide thumbs Also See for SPA525G:

Table of Contents

Download this manual

VPN Status on SPA525G/SPA525G2 IP Phone

This document showcases the procedure for checking the VPN Status on the

SPA525G/SPA525G2 IP Phones. The VPN Status information can be used to verify if the

VPN is properly connected. This can be done by looking at parameters like number of bytes

sent or number of bytes received etc.

• SPA 525G

• SPA 525G2

Step 1. Press the Setup button on the phone. The Information and Settings menu appears.

Step 2. Use the navigation keys and scroll down to Status. Press the Select softkey. The

Status menu appears.

Table of Contents

Do you have a question about the SPA525G and is the answer not in the manual?

Page 1 This document showcases the procedure for checking the VPN Status on the SPA525G/SPA525G2 IP Phones. The VPN Status information can be used to verify if the VPN is properly connected. This can be done by looking at parameters like number of bytes sent or number of bytes received etc.
Page 2 VPN Server. • Bytes Send — This field will show total number of bytes sent from the SPA525G/SPA525G2 to VPN Server. • Bytes Recv — This field will show total number of bytes received from the VPN Server to the SPA525G/SPA525G2.

Spa525g2