Resyncing A Phone - Cisco SPA942 - - IP Phone Administration Manual

Provisioning Basics
Upgrading, Resyncing, and Rebooting Phones
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
Log_Upgrade_Requ
est_Msg
Log_Upgrade_Succ
ess_Msg
Log_Upgrade_Failur
e_Msg
License Keys
4-

Resyncing a Phone

You can resync an IP phone to a specific remote profile. The configuration of the
phone you resync will match the configuration of the remote phone. The phone
can be configured to resync its internal configuration state to a remote profile
periodically and on power up.
Use the following syntax to resync a phone's profile to a profile on a TFTP, HTTP, or
HTTPS server:
http://phone-ip-addr/admin/resync?protocol://server-
name[:port]/profile-pathname
Description
Syslog message issued at the start of a firmware upgrade
attempt.
The default is
$PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH
Syslog message issued after a firmware upgrade attempt
completes successfully.
The default is
$PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH
-- $ERR
Syslog message issued after a failed firmware upgrade
attempt.
The default is
$PN $MAC -- Upgrade failed: $ERR.
This field is empty.
NOTE: The phone resyncs only when it is idle.
7
141