SPA and Wireless IP Phone Field Reference
User Tab
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
Screen Saver Trigger
Time
Screen Saver Refresh
Time
Text Logo
BMP Picture Download
URL
Logo Type
Background Picture
Type
LCD Contrast
Back Light Enable
Description
Number of seconds that the phone remains idle before
the screen saver turns on.
Number of seconds before the screen saver should refresh
(if, for example, you chose a rotation of pictures).
Text logo to display when the phone boots up. A service
provider, for example, can enter logo text as follows:
•
Up to 2 lines of text
•
Each line must be fewer than 32 characters
•
Insert a new line character (\n) between lines
•
Insert escape code %0a
For example, "Super\n%0aTelecom" will display:
Super
Telecom
For more information, see the
Information and Display Settings" section on page 47.
URL locating the bitmap (.BMP) file to display on the LCD
background.
For more information, see the
Information and Display Settings" section on page 47
Select from Default, Download BMP Picture, or Text Logo.
Defaults to Default.
For more information, see the
Information and Display Settings" section on page 47
Select from Default, Download BMP Picture, or None.
Defaults to Default.
For more information, see the
Information and Display Settings" section on page 47.
Enter a number value from 1 to 30. The higher the number,
the greater the contrast on the screen.
Select yes to enable the screen back light.
"Configuring Phone
"Configuring Phone
"Configuring Phone
"Configuring Phone
B
.
.
270