Line Key Led Pattern - Cisco SPA942 - - IP Phone Administration Manual

SPA and Wireless IP Phone Field Reference
Phone Tab
NOTE
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
SCA Barge-In Enable

Line Key LED Pattern

Does not apply to the WIP310.
Parameter
Idle LED
Remote Undefined LED
Local Seized LED
Remote Seized LED
Local Progressing LED
Description
Enables the SCA Barge-In.
Defaults to no.
Description
LED pattern during the Idle state, where the call
appearance is not is in use and is available to make a
new call. Leaving this entry blank indicates the default
value of c=g.
LED pattern during the Remote Undefined state, where
the shared call state is undefined (the station is still
waiting for the state information from the application
server). Not applicable if the call appearance is not
shared. Leaving this entry blank indicates the default
value of c=r;p=d.
LED pattern during the Local Seized state, where this
station has seized the call appearance to prepare for a
new outbound call. Leaving this entry blank indicates
the default value of c=r.
LED pattern during the Remote Seized state, where the
shared call appearance is seized by another station.
Not application if the call appearance is not shared.
Leaving this entry blank indicates the default value of
c=r;p=d.
LED pattern during the Local Progressing state, where
this station is attempting on this call appearance an
outgoing call that is in proceeding (i.e. the called
number is ringing). Leaving this entry blank indicates
the default value of c=r.
B
241