Monitoring The Cisco Spa500S; Cisco Spa500S Unit Monitoring Notes - Cisco SPA303 Administration Manual

Configuring the Cisco SPA500S Attendant Console

Monitoring the Cisco SPA500S

Monitoring the Cisco SPA500S
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
To display the status of the Cisco SPA500S, click the Attendant Console Status link
on the GUI. The status of each attendant console attached (Unit 1 and Unit 2) is
shown. Parameters are read-only.

Cisco SPA500S Unit Monitoring Notes

The following table describes each parameter; both units display the same
parameters.
Parameter
Unit Enable
Subscribe Expires
HW Version
Unit Online
Subscribe Retry Interval
SW Version
Key Name
Type
Line
Station
Subscribe
Description
Displays if the Unit is enabled or disabled.
Displays when the current subscription expires. After
the subscription expires, the Cisco SPA500S
automatically requests a new subscription.
Displays the version of the hardware.
Displays whether the unit is connected or not.
Displays the length of time the Cisco SPA500S waits to
try again if subscription fails.
Displays the version of the software currently running
on the unit.
Displays the name assigned to each key (1-32) on the
Cisco SPA500S attendant console unit.
Displays the function enabled for each key (1-32) on the
Cisco SPA500S attendant console unit.
Displays the extension assigned to each key (1-32) on
the Cisco SPA500S attendant console unit.
Displays the subscribe URI configured for each key (1-
32) on the Cisco SPA500S attendant console unit.
Displays the subscription status of the unit/key. The
value can be Yes, Fail, or No. No indicates that the
feature/function (fnc) of that line does not require a
subscription (such as speed dial).
9
219