Cisco SPA942 - - IP Phone Administration Manual page 244

SPA and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
Remote Progressing LED
Local Ringing LED
Remote Ringing LED
Local Active LED
Remote Active LED
Local Held LED
Remote Held LED
Register Failed LED
Disabled LED
Registering LED
Description
LED pattern during the Remote Progressing state,
where another station is attempting on this shared call
appearance an outbound call that is progressing. Not
applicable if the call appearance is not shared. Leaving
this entry blank indicates the default value of c=r;p=d.
LED pattern during the Local Ringing state, when the
call appearance is ringing. Leaving this entry blank
indicates the default value of c=r;p=f.
LED pattern during the Remote Ringing state, where
the shared call appearance is in ringing on another
station. Not applicable if the call appearance is not
shared. Leaving this entry blank indicates the default
value of c=r;p=d.
LED pattern during the Local Active state, where the
call appearance is engaged in an active call. Leaving
this entry blank indicates the default value of c=r.
LED pattern during the Remote Active state, where
another station is engaged in an active call on this
shared call appearance. Not applicable is this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=d.
LED pattern during the Local Held state, where the call
appearance is held by this station. Leaving this entry
blank indicates the default value of c=r;p=s.
LED pattern during the Remote Held state, where
another station has placed this call appearance on
hold. Not applicable if the call appearance is not
shared. Leaving this entry blank indicates the default
value of c=4,p=s.
LED pattern when the corresponding extension has
failed to register with the proxy server. Leaving this
entry blank indicates the default value of c=a.
LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving
this entry blank indicates the default value of c=o.
LED Pattern when the corresponding extension is
trying to register with the proxy server. Leaving this
entry blank indicates the default value of c=r;p=s.
B
242