Configuring the SPA932 Attendant Console
Setting Up the SPA932 Attendant Console
STEP 5
STEP 6
Cisco SPA and Wireless IP Phone Administration Guide
In the BLF List URI field, enter the URI to generate BLF keys:
listname@domain.com;vid=2
Where:
•
listname: Name of the list.
•
domain.com: Name of the domain.
•
vid: Assigns keys to the extension. By default, the SUBSCRIBE is sent when
"Ext 1" is registered. You must set the "vid=" to a different value to change
this behavior.
For example:
mylist@broadsoft.com;vid=2
Click Submit All Changes.
SPA932 Parameter Notes
Parameters in the SPA932/Attendant Console web page are described in the
following table. For information about Unit/Key syntax, see the previous sections.
.
Parameter
Subscribe Expires
Subscribe Retry Interval
Unit 1 Enable
Subscribe Delay
Unit 2 Enable
Description
Specifies how long the subscription remains valid.
After the specified period of time, elapses, the SPA932
initiates a new subscription.
Defaults to 1800.
Specifies the length of time to wait to try again if
subscription fails.
Enables or disables the first SPA932 unit (each phone
can have up to two SPA932 units attached).
Length of delay before attempting to subscribe.
Defaults to 1.
Enables or disables the second SPA932 unit (each
phone can have up to two SPA932 units attached).
9
183