Cisco SPA942 - - IP Phone Administration Manual page 165

Configuring Regional Parameters and Supplementary Services
Using a Dial Plan
STEP 5
Cisco SPA and Wireless IP Administration Phone Guide
Parameter
Dial Plan
Caller ID Map
Enable IP Dialing
Emergency Number
Click Submit All Changes.
Description
Dial plan script for the selected extension.
The dial plan syntax allows the designation of three
parameters for use with a specific gateway:
•
uid – the authentication user-id
•
pwd – the authentication password
•
nat – if this parameter is present, use NAT mapping
Separate each parameter with a semi-colon (;).
See the Cisco SPA9000 Voice System Administration Guide
for more detailed information on dial plans.
Inbound caller ID numbers can be mapped to a different string.
For example, a number that begins with +44xxxxxx can be
mapped to 0xxxxxx. This feature has the same syntax as the
Dial Plan parameter. With this parameter, you can specify how
to map a caller ID number for display on screen and recorded
into call logs.
NOTE Not applicable to WIP310.
Enable or disable IP dialing.
Defaults to no.
Enter a comma-separated list of emergency numbers. When
one of these numbers is dialed, the unit disables processing of
CONF HOLD
, , and other similar softkeys or buttons to avoid
accidentally putting the current call on hold. The phone also
disables hook flash event handling.
Only the far end can terminate an emergency call.
The phone is restored to normal after the call is terminated and
the SPA9X2 is back on-hook.
Maximum number length is 63 characters.
Defaults to blank (no emergency number).
NOTE Not applicable to WIP310.
8
163