General - Cisco SPA942 - - IP Phone Administration Manual

SPA and Wireless IP Phone Field Reference
932 Tab (SPA962/SPA525G only)
Cisco SPA and Wireless IP Phone Administration Guide

General

Parameter
Subscribe Expires
Subscribe Retry Interval
Unit 1 Enable
Subscribe Delay
Unit 2 Enable
Server Type
Test Mode Enable
Attendant Console Call
Pickup Code
BLF List URI
Unit 1 Key 1-32
Description
Specifies how long the subscription remains valid.
After the specified period of time, elapses, the SPA932
initiates a new subscription.
Defaults to 1800.
Specifies the length of time to wait to try again if
subscription fails.
Enables or disables the first SPA932 unit (each IP
phone can have up to two SPA932s attached).
Length of delay before attempting to subscribe.
Defaults to 1.
Enables or disables the second SPA932 unit (each IP
phone can have up to two SPA932s attached).
Selects the type of server used (SPA9000, BroadSoft,
or Asterisk).
Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the SPA932 are
returned to off, all the keys become orange. The
SPA962 must be rebooted after the test is completed.
The star code used for picking up a ringing call.
Defaults to *98.
Automatically configures BLF subscriptions for all
users on a monitored list. See
Busy Lamp Field Auto-Configuration (SPA525G),
page 182.
Enter a strings that define the extension and other
parameters associated with each lighted button on the
first SPA932 unit. Keywords and values are case-
sensitive. The configuration script is described in
"Unit/Key Configuration Scripts" section on
.
page 179
B
Configuring BroadSoft
272