User Tab - Cisco SPA942 - - IP Phone Administration Manual

SPA and Wireless IP Phone Field Reference

User Tab

User Tab
Cisco SPA and Wireless IP Phone Administration Guide
Parameter
Dial Plan
Enable IP Dialing
This section describes the fields for the following headings on the User tab:
• Call Forward, page 267
• Speed Dial, page 267
• Supplementary Services, page 267
• Web Information Service Settings (SPA962/SPA525G), page 268
• Traffic Service Information Settings (SPA962), page 268
• Audio Volume, page 269
• Screen (SPA525G), page 269
• Phone GUI Menu Color Settings (SPA962 only), page 271
Description
Dial plan script for this line.
The default is (<9:>xx.)
(*xx| [ 3469]11| 0 |00|[2-9]xxxxxx|1xxx[2-
9]xxxxxxS0|xxxxxxxxxxxx.)
The dial plan syntax is expanded in the SPA to allow the
designation of three parameters to be used with a
specific gateway:
•
uid - the authentication user-id
•
pwd - the authentication password
•
nat - if this parameter is present, use NAT mapping
Each parameter is separated by a semi-colon (;).
Enable or disable IP dialing.
Defaults to no.
B
266