2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
26
If you have trouble accessing the web interface, perform the following steps:
SPA9X2
Press the Setup button on the phone.
Select Network.
Scroll to Enable Web Server and make sure that it is set to Yes. If not, press the
Edit soft key and press y/n soft key to set it to Yes.
Press OK, then press Save.
NOTE: If your service provider disabled
access to the web UI, you must contact the
service provider.
WIP310:
In the Home screen, press the Select button to choose Settings.
Press the Select button again to reach the Settings menu.
Misc Settings
Scroll to highlight
Press the left arrow to ensure that Enable Web Server is set to On.
Press the Select button to save this setting.
SPA525G:
Press the Setup button.
Select Network Configuration.
Scroll to Web Server and make sure it is set to On.
Press Save.
Using the Web Administration User Interface
and press the Select button.
Cisco SPA and Wireless IP Phone Administration Guide
Getting Started