Cisco SPA942 - - IP Phone Administration Manual page 183

Configuring the SPA932 Attendant Console
Setting Up the SPA932 Attendant Console
Cisco SPA and Wireless IP Phone Administration Guide
Assigning SPA932 LEDs to Phone Extensions
By default, all 32 keys on the SPA932 are assigned to the first extension on the
IP phone (extension 101 based on the default multicast autoconfiguration).
To limit the number of LEDs assigned to the first extension, use the vid=1
keyword. Then use the vid=2 keyword to assign the next set of keys to the
second extension. The numeric values correspond to the default extensions on
the phone as follows:
• vid=1—extension 101
• vid=2—extension 102
• vid=3—extension 103
• vid=4—extension 104
• vid=5—extension 105
• vid=6—extension 106
SPA9000 Syntax
Find more complete information in the Cisco SPA9000 Voice System Installation
and Configuration Guide
The following entry enables speed dialing, BLF monitoring, and call pick up on a
SPA9000 server with:
• IP address 192. 1 68. 1 . 1 01
• station name phone1
• extension 101
• SPA932 unit/key using the phone's extension 2
Example:
fnc=sd+blf+cp;sub=phone1@$PROXY;usr=101@$PROXY;nme=phone1;vid=2
.
9
181