Cisco Spa500S Unit Monitoring Notes - Cisco 501G Administration Manual

Configuring the Cisco SPA500S Attendant Console
Monitoring the Cisco SPA500S
Cisco SPA500 Series and WIP310 IP Phone Administration Guide

Cisco SPA500S Unit Monitoring Notes

The following table describes each parameter; both units display the same
parameters.
Parameter
Unit Enable
Subscribe Expires
HW Version
Unit Online
Subscribe Retry Interval
SW Version
Key Name
Type
Line
Station
Subscribe
Description
Displays if the Unit is enabled or disabled.
Displays when the current subscription expires. After
the subscription expires, the Cisco SPA500S
automatically requests a new subscription.
Displays the version of the hardware.
Displays whether the unit is connected or not.
Displays the length of time the Cisco SPA500S waits to
try again if subscription fails.
Displays the version of the software currently running
on the unit.
Displays the name assigned to each key (1-32) on the
Cisco SPA500S attendant console unit.
Displays the function enabled for each key (1-32) on the
Cisco SPA500S attendant console unit.
Displays the extension assigned to each key (1-32) on
the Cisco SPA500S attendant console unit.
Displays the subscribe URI configured for each key (1-
32) on the Cisco SPA500S attendant console unit.
Displays the subscription status of the unit/key. The
value can be Yes, Fail, or No. No indicates that the
feature/function (fnc) of that line does not require a
subscription (such as speed dial).
9
174