Monitoring The Spa932 - Cisco SPA942 - - IP Phone Administration Manual

9

Monitoring the SPA932

184
Parameter
Server Type
Test Mode Enable
Attendant Console Call
Pickup Code
BLF List URI
Unit 1 Key 1-32
To display the status of the SPA932, click the SPA932 Status link on the GUI. The
status of each attendant console attached (Unit 1 and Unit 2) is shown. Parameters
are read-only.
Configuring the SPA932 Attendant Console
Description
Selects the type of server used (SPA9000, BroadSoft,
or Asterisk).
Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the attendant
console are returned to off, all the keys become
orange. The phone must be rebooted after the test is
completed.
The star code used for picking up a ringing call.
Defaults to *98.
Automatically configures BLF subscriptions for all
users on a monitored list.
Enter a strings that define the extension and other
parameters associated with each lighted button on the
first SPA932 unit. Keywords and values are case-
sensitive. The configuration script is described in
"Unit/Key Configuration Scripts" section on
.
page 179
Cisco SPA and Wireless IP Phone Administration Guide
Monitoring the SPA932