Appendix D Configurable Parameter For The Sip Ip Phone - Cisco 7960G Administrator's Manual

Appendix D Configurable Parameters for the SIP IP Phone
Table D-1
Parameter
call_waiting
callerid_blocking
cfwd_url
cnf_join_enable
Configuration File Parameters (continued)
Description
(Phone-specific; optional) Configures call waiting.
Valid values are as follows:
•
•
•
•
Default is 1.
(Phone-specific; optional) Configures caller ID blocking. When
enabled, the phone blocks its own number or e-mail address from
phones that have caller identification enabled.
Valid values are as follows:
•
•
•
•
Default is 0.
(Optional) Configures the call forwarding feature. The maximum
allowable characters for the string is 128. The character can be a
telephone number or a URL.
Note
(Optional) Whether the conference bridge, when it hangs up, should
attempt to join the two leaf nodes.
Valid values are as follows:
•
•
Default is 1.
0—Disabled by default, but can be turned on and off using the
user interface. When disabled, call waiting calls are not
received.
1—Enabled by default, but can be turned on and off using the
user interface. When enabled, call waiting calls are accepted.
2—Disabled permanently and cannot be turned on and off
locally using the user interface. Specify this parameter in the
phone-specific configuration file.
3—Enabled permanently and cannot be turned on and off
locally using the user interface. Specify this parameter in the
phone-specific configuration file.
0—Disabled by default, but can be turned on and off using the
user interface. When disabled, the caller identification is
included in the Request-URI header field.
1—Enabled by default, but can be turned on and off using the
user interface. When enabled, "Anonymous" is included in
place of the user identification in the Request-URI header field.
2—Disabled permanently and cannot be turned on and off
locally using the user interface. Specify this parameter in the
phone-specific configuration file.
3—Enabled permanently and cannot be turned on and off
locally using the user interface. Specify this parameter in the
phone-specific configuration file.
This parameter cannot be set in the configuration file.
0—Do not join the two leaf nodes.
1—Join the two leaf nodes.
Cisco SIP IP Phone Administrator Guide, Release 6.x and 7.x
D-3