Attaching A Cisco Unified Ip Phone Expansion Module - Cisco CP-7961G Administration Manual

Attaching a Cisco Unified IP Phone Expansion Module

Attaching a Cisco Unified IP Phone Expansion Module
The Cisco Unified IP Phone Expansion Module attaches to a Cisco Unified IP Phone 7962G, 7961G and
7961G-GE to extend the number or line appearances or programmable buttons on your phone. You can
customize the button templates for the Cisco Unified IP Phone Expansion Module 7914 to determine the
number of line appearances and speed dial buttons. See
for details.
The Cisco Unified IP Phone Expansion Module is not supported on the Cisco Unified IP Phone 7942G,
Note
7941G, and 7941G-GE.
You can attach one or more Cisco Unified IP Phone Expansion Modules to the Cisco Unified
IP Phone 7962G by using one of the following methods:
•
•
You can attach a Cisco Unified IP Phone Expansion Module 7914 to the Cisco Unified IP Phone 7961G
and 7961G-GE by using one of the following methods:
•
•
To configure the Cisco Unified IP Phone Expansion Module on the Cisco Unified IP Phone, follow these
steps:
Procedure
Log in to Cisco Unified Communications Manager Administration.
Step 1
Cisco Unified Communications Manager Administration window displays.
Step 2 From the menu, choose Device > Phone.
The Find and List Phone page appears. You can search for one or more phones that you want to configure
for the Cisco Unified IP Phone Expansion Module.
Select and enter your search criteria and click Find.
Step 3
The Find and List Phone window displays showing a list of the phones that match your search criteria.
Click the IP Phone that you want to configure for the Cisco Unified IP Phone Expansion Module.
Step 4
The Phone Configuration window displays.
Step 5 Scroll to the Expansion Module Information section.
To add support for one expansion module on Cisco Unified IP Phones 7961G and 7961G-GE, in the
Step 6
Module 1 field, select 7914 14-Button Line Expansion Module.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
3-8
When you initially add the phone to Cisco Unified Communications Manager, by selecting
7914 14-Button Line Expansion Module for the Cisco Unified IP Phone Expansion 7914, 7915
12-Button Line Expansion Module or 7915 24-Button Line Expansion Module for the Cisco
Unified IP Phone Expansion Module 7915, or 7916 12-Button Line Expansion Module or
7916 24-Button Line Expansion Module for the Cisco Unified IP Phone Expansion Module 7916
in the Module 1 or Module 2 fields, and choosing the appropriate expansion module firmware. See
in the following procedure.
After the phone is configured in Cisco Unified Communications Manager.
When you initially add the phone to Cisco Unified Communications Manager, you can choose
7914 14-Button Line Expansion Module in the Module 1 or Module 2 fields and then choose the
appropriate expansion module firmware. See in the following procedure.
After the phone is configured in Cisco Unified Communications Manager.
Chapter 3 Setting Up the Cisco Unified IP Phone
Modifying Phone Button Templates, page 5-22
OL-21011-01