Performing Final End User Configuration Steps - Cisco CP-7961G Administration Manual

Appendix E Basic Phone Administration Steps
l.

Performing Final End User Configuration Steps

If you are not already on the End User Configuration page, choose User Management > End User to
perform some final configuration tasks. Use the Search fields and the Find button to locate the user (i.e.
John Doe), then click on the user ID to get to the End User Configuration window for the user.
In the End User configuration window, do the following:
Procedure
Step 1 In the Directory Number Associations pane of the screen, set the primary extension from the drop-down
list.
In the Mobility Information pane, check the Enable Mobility box.
Step 2
In the Permissions Information pane, use the User Group buttons to add this user to any user groups. For
Step 3
example, you may want to add the user to a group that has been defined as a "Standard CCM End User
Group."
To view all configured user groups, choose User Management > User Group.
Click Save.
Step 4
OL-21011-01
– Click the Go button next to the "Back to User" Related link in the upper-right corner of the
screen.
Proceed to Performing Final End User Configuration Steps, page
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
Performing Final End User Configuration Steps
E-7.
E-7