Cisco CP-7961G Administration Manual page 133

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Programmable line
keys (PLK)
Protected calling
Quality Reporting Tool
(QRT)
Redial
Intelligent Session
Control
Ring setting
OL-21011-01
Description
The administrator can assign features to line
buttons. Softkeys normally control these features;
for example, New Call, Call Back, End Call, and
Forward All. When the administrator configures
these features on the line buttons, they always
remain visible, so users can have a "hard" New
Call key.
Provides a secure (encrypted) connection between
two phones. A security tone is played at the
beginning of the call to indicate that both phones
are protected. Some features, such as conference
calling, shared lines, Extension Mobility, and Join
Across Lines are not available when protected
calling is configured. Protected calls are not
authenticated.
Allows users to use the QRT softkey on a phone to
submit information about problem phone calls.
QRT can be configured for either of two user
modes, depending upon the amount of user
interaction desired with QRT.
Allows users to call the most recently dialed phone
number by pressing a button.
Reroutes a direct call to users' mobile phone to the
enterprise number (desk phone). For an incoming
call to remote destination (mobile phone), only
remote destination rings; desk phone does not ring.
When the call is answered on their mobile phone,
the desk phone displays a Remote In Use message.
During these calls, users can make use of various
features of their mobile phone.
Identifies ring type used for a line when a phone
has another active call.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to:
Cisco Unified Communications Manager
•
System Guide, Cisco Unified IP
Cisco Unified Communications Manager
•
Administration Guide,
Template Configuration.
• Cisco Unified Communications Manager
Administration Guide,
Button Templates.
For more information about security, see
Overview of Supported Security Features,
page 1-13.
For additional information, refer to this:
Cisco Unified Communications Manager
Security Guide.
For more information refer to:
Cisco Unified Communications Manager
•
System Guide, Cisco Unified IP
Cisco Unified Communications Manager
•
Features and Services Guide,
Report Tool.
Requires no configuration.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, Cisco Unified
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide,
Configuration.
Cisco Unified Communications Manager
•
Features and Services Guide,
Phone Rings.
Creating Custom Phone Rings, page
•
Phones.
Phone Button
Modifying Phone
Phones.
Quality
Mobility.
Directory Number
Custom
6-2.
5-15