Cisco CP-7961G Administration Manual page 177

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Table 8-2 Network Configuration Area Items (continued)
Item
SW Port Configuration
PC Port Configuration
TFTP Server 2
User Locale
Network Locale
Headset Enabled
User Locale Version
Network Locale Version
PC Port Disabled
Speaker Enabled
GARP Enabled
Video Capability Enabled
Voice VLAN Enabled
Auto Line Select
DSCP for Call Control
DSCP for Configuration
DSCP for Services
Security Mode
Web Access Enabled
OL-21011-01
Description
Speed and duplex of the switch port, where:
A—Auto Negotiate
•
• 10H—10-BaseT/half duplex
10F—10-BaseT/full duplex
•
100H—100-BaseT/half duplex
•
100F—100-BaseT/full duplex
•
No Link—No connection to the switch port
•
Speed and duplex of the switch port, where:
A—Auto Negotiate
•
• 10H—10-BaseT/half duplex
10F—10-BaseT/full duplex
•
100H—100-BaseT/half duplex
•
100F—100-BaseT/full duplex
•
No Link—No connection to the PC port
•
Backup TFTP server that the phone uses if the primary TFTP server is unavailable.
User locale associated with the phone user. Identifies a set of detailed information to
support users, including language, font, date and time formatting, and alphanumeric
keyboard text information.
Network locale associated with the phone user. Identifies a set of detailed information to
support the phone in a specific location, including definitions of the tones and cadences
used by the phone.
Indicates whether the Headset button is enabled on the phone.
Version of the user locale loaded on the phone.
Version of the network locale loaded on the phone.
Indicates whether the PC port on the phone is enabled or disabled.
Indicates whether the speakerphone is enabled on the phone.
Indicates whether the phone learns MAC addresses from Gratuitous ARP responses.
Indicates whether the phone can participate in video calls when connected to an
appropriately equipped PC.
Indicates whether the phone allows a device attached to the PC port to access the Voice
VLAN.
Indicates whether the phone shifts the call focus to incoming calls on all lines.
DSCP IP classification for call control signaling.
DSCP IP classification for any phone configuration transfer.
DSCP IP classification for phone-based services.
Displays the security mode that is set for the phone.
Indicates whether web access is enabled (Yes) or disabled (No) for the phone.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
Network Configuration
8-7