Cisco CP-7961G Administration Manual page 130

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Intercom
Join/Select
Join Across
Lines/Select
Line select
Line select for voice
messages
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
5-12
Description
Allows users to place and receive intercom calls
using programmable phone buttons. You can
configure intercom line buttons to:
Directly dial a specific intercom extension.
•
Initiate an intercom call and then prompt the
•
user to enter a valid intercom number.
Note If your user logs into the same phone on a
daily basis using their Cisco Extension
Mobility profile, assign the phone button
template that contains intercom
information to their profile, and assign the
phone as the default intercom device for
the intercom line.
Allows user to join two or more calls that are on
one line to create a conference call and remain on
the call.
Allows users to apply the Join feature to calls that
are on multiple phone lines.
If this feature is disabled (default), then the
ringing line is selected. When enabled, the primary
line is picked up even if a call is ringing on another
line. The User must manually select the other line.
This feature can also be enabled or
Note
disabled for Extension Mobility.
When disabled (default), pressing the Messages
button selects the line that has a voice message. If
more than one line has voice mail, then the first
available line is selected. When enabled, the
primary line is always used to retrieve voice
messages.
This feature can also be enabled or
Note
disabled for Extension Mobility.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
Cisco Unified Communications Manager
Feature and Services Guide, Intercom.
For more information:
See Configuring Softkey Templates,
•
page 5-24.
• Refer to Cisco Unified Communications
Manager System Guide,
Phones.
For more information:
See the Configuring Softkey Templates,
•
page 5-24.
Refer to Cisco Unified Communications
•
Manager System Guide,
Phones.
For more information, refer to the option
"Always use prime line" in the following
chapters of Cisco Unified Communications
Manager Administration Guide:
Device Profile Configuration
•
Common Phone Profile Configuration
•
Cisco Unified IP Phone Configuration
•
For more information, refer to the option
"Always use prime line for voice message" in
the following chapters of Cisco Unified
Communications Manager Administration
Guide:
Device Profile Configuration
•
Common Phone Profile Configuration
•
Cisco Unified IP Phone Configuration
•
Cisco Unified IP
Cisco Unified IP
OL-21011-01