Cisco CP-7961G Administration Manual page 101

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-15 Media Configuration Menu Options (continued)
Option
Wideband Headset
Enterprise Advertise
G.722 Codec
Device Advertise
G.722 Codec
OL-21011-01
Description
Indicates whether wideband is enabled or
disabled for the headset.
Default: Disabled
Enables/disables Cisco Unified IP Phones to
advertise the G.722 codec to Cisco Unified
Communications Manager.
For more information, see the Cisco Unified
Communications Manager System Guide,
Unified IP Phones chapter, "Codec Usage"
section.
When a phone is registered with a Cisco
Note
Unified Communications Manager that
does not support this setting, the default
is "Disabled."
Allows you to override the Enterprise Advertise
G.722 Codec on a per-phone basis.
The default is "Use System Default," which
means the value configured for the Enterprise
Advertise G.722 Codec parameter gets used.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
To Change
If Wideband Headset UI Control is enabled,
•
you or the user can use the phone and choose
> User Preferences > Audio
Preferences > Wideband Headset.
If Wideband Headset UI Control is disabled,
•
use Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration to set this value.
If you allowed this option to be user
Note
controllable (in the Wideband Headset UI
Control option), the user-configured value
takes precedence.
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
Cisco
From Cisco Unified Communications Manager
Administration, choose Device > Phone.
Device Configuration Menu
4-29