Chapter 7
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Network Statistics Screen
The Network Statistics screen displays information about the phone and network performance.
describes the information that appears in this screen.
To display the Network Statistics screen, follow these steps:
Procedure
Press the Settings button.
Step 1
Select Status.
Step 2
Select Status > Network Statistics.
Step 3
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey.
To exit the Network Statistics screen, press the Exit softkey.
Table 7-3
Item
Rx Frames
Tx Frames
Rx Broadcasts
One of the following values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Elapsed Time
Port 1
Port 2
OL-21011-01
Network Statistics Message Information
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
Description
Number of packets received by the phone
Number of packets sent by the phone
Number of broadcast packets received by the phone
Cause of the last reset of the phone
Amount of time that has elapsed since the phone last rebooted
Link state and connection of the PC port (for example,
means that the PC port is in a link-up
100 Mb Full-Duplex
state and has auto-negotiated a full-duplex, 100-Mbps
connection)
Link state and connection of the Network port
Status Menu
Table 7-3
Auto
7-9