Cisco CP-7961G Administration Manual page 81

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-3
Table 4-3 IPv4 Configuration Menu Options
Option
DHCP
IP Address
Subnet Mask
Default Router 1
Default Router 2
Default Router 3
Default Router 4
Default Router 5
OL-21011-01
describes the IPv4 configuration menu options.
Description
Indicates whether the phone has DHCP enabled or
disabled.
When DHCP is enabled, the DHCP server assigns the
phone an IPv4 address. When DHCP is disabled, the
administrator must manually assign an IPv4 address to the
phone.
Internet Protocol version 4 (IPv4) address of the phone.
If you assign an IPv4 address with this option, you must
also assign a subnet mask and default router. See
Mask and Default Router 1
Subnet mask used by the phone.
Default router used by the phone (Default Router 1) and
optional backup routers (Default Router 2–5).
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
Subnet
options in this table.
Network Configuration Menu
To Change
Unlock network configuration
1.
options.
Scroll to the DHCP option and
2.
press the No softkey to disable
DHCP, or press the Yes softkey
to enable DHCP.
Press the Save softkey.
3.
Unlock network configuration
1.
options.
Set the DHCP option to No.
2.
3. Scroll to the IP Address option,
press the Edit softkey, and then
enter a new IP Address.
4. Press the Validate softkey and
then press the Save softkey.
1. Unlock network configuration
options.
Set the DHCP option to No.
2.
Scroll to the Subnet Mask
3.
option, press the Edit softkey,
and then enter a new subnet
mask.
Press the Validate softkey and
4.
then press the Save softkey.
Unlock network configuration
1.
options.
Set the DHCP option to No.
2.
Scroll to the appropriate Default
3.
Router option, press the Edit
softkey, and then enter a new
router IP address.
Press the Validate softkey.
4.
Repeat Steps 3 and 4 as needed
5.
to assign backup routers.
Press the Save softkey.
6.
4-9