Cisco CP-7961G Administration Manual page 62

Installing the Cisco Unified IP Phone
Note Before you install a phone, even if it is new, upgrade the phone to the current firmware image. Before
using external devices, read the
information.
Before You Begin
Remove the hookswitch clip (see
To install a Cisco Unified IP Phone, perform the tasks described in
Table 3-1 Installing the Cisco Unified IP Phone 7962G and 7942G
Task Purpose
Connect the handset to the Handset port.
1.
Connect a headset to the Headset port.
2.
Optional. You can add a headset later if you do not
connect one now.
(Cisco Unified IP Phones 7962G and 7942G only)
3.
Connect a wireless headset.
Optional. You can add a wireless headset later if you
do not want to connect one now.
(Optional) Connect the power supply to the Cisco DC
4.
Adapter port.
Connect a straight-through Ethernet cable from the
5.
switch to the network port labeled 10/100 SW on the
Cisco Unified IP Phones 7962G, 7942G, 7961G, and
7941G, or to the network port labeled 10/100/1000
SW on the Cisco Unified IP Phones 7961G-GE and
7941G-GE
Each Cisco Unified IP Phone ships with one Ethernet
cable in the box.
You can use either Category 3/5/5e cabling for
10-Mbps connections, but you must use Category 5/5e
for 100 Mbps connections.
Connect a straight-through Ethernet cable from
6.
another network device, such as a desktop computer,
to the access port labeled 10/100 PC port on the Cisco
Unified IP Phones 7962G, 7942G, 7961G, and 7941G,
or to the network port labeled 10/100/1000 PC on the
Cisco Unified IP Phones 7961G-GE and 7941G-GE.
(Optional) You can connect another network device
later if you do not connect one now.
You can use either Category 3/5/5e cabling for
10-Mbps connections, but you must use Category 5/5e
for 100 Mbps connections.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
3-6
Using External Devices, page 3-5
Handset, page 3-3) from the cradle area.
Related Topics
—
See Headset, page 3-4
Refer to the wireless headset documentation for
information.
See Adding Phones to the Cisco Unified Communications
Manager Database, page 2-8
See Network and Access Ports, page 3-2
See Network and Access Ports, page 3-2
Chapter 3 Setting Up the Cisco Unified IP Phone
for safety and performance
Table 3-1:
for supported headsets.
for guidelines.
for guidelines.
for guidelines.
OL-21011-01