Configuring Corporate And Personal Directories - Cisco CP-7961G Administration Manual

Configuring Corporate and Personal Directories

Table 5-2
Configuration Window
Enterprise Phone
Configuration window
Common Phone Profile
window
Phone Configuration
window
Configuring Corporate and Personal Directories
The Directories button on the Cisco Unified IP Phone 7962G and 7942G gives users access to several
directories. These directories can include:
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
5-20
Configuration parameters for Cisco Unified IP Phones
Path
System > Enterprise Phone
Configuration
Device > Device Settings >
Common Phone Profile
Device > Phone; Product
Specific Configuration portion
of window
Chapter 5 Configuring Features, Templates, Services, and Users
Parameters
You can set the following parameters
in any of the three configuration
windows:
Settings Access
•
Video Capabilities
•
Web Access
•
• Load Server
• RTCP
Peer Firmware Sharing
•
Cisco Discovery Protocol (CDP):
•
Switch Port
Cisco Discovery Protocol (CDP):
•
PC Port
Link Layer Discovery Protocol -
•
Media Endpoint Discover
(LLDP-MED): Switch Port
Link Layer Discovery Protocol
•
(LLDP): PC Port
IPv6 Load Server
•
• 802.1x Authentication
When you set the parameters,
Note
select the Override Common
Settings checkbox for each
setting you wish to update. If
you do not check this box, the
corresponding parameter
setting does not take effect. If
you set the parameters at the
three configuration windows,
the setting takes precedence in
the following order:
• Phone Configuration window
Common Phone Profile window
•
Enterprise Phone Configuration
•
window
OL-21011-01