Media Configuration Menu - Cisco CP-7961G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Media Configuration Menu

The Media Configuration menu displays whether the headset, wireless headset, speakerphone, and video
capability are enabled on the phone. This menu also displays options for recording tones that the phone
may play to indicate that a call may be recorded.
Table 4-15 Media Configuration Menu Options
Option
Headset Enabled
Headset Hookswitch
Control Enabled
(Cisco Unified IP
Phones 7962G and
7942G only)
Speaker Enabled
Video Capability
Enabled
Recording Tone
OL-21011-01
Description
Indicates whether the Headset button is enabled
on the phone.
Indicates whether the wireless headset
hookswitch feature is enabled on the phone.
Indicates whether the speakerphone is enabled
on the phone.
Indicates whether the phone can participate in
video calls when connected to an appropriately
equipped computer.
Indicates whether a recording tone (often
referred to as a beep tone) is enabled or disabled
for the phone. If the recording tone option is
enabled, the phone plays the beep tone in both
directions of every call, regardless of whether
the call actually gets recorded. The beep tone
first sounds when a call is answered.
You may want to notify your users if you enable
this option.
Default: Disabled
Related Parameters:
Recording Tone Local Volume
•
Recording Tone Remote Volume
•
• Recording Tone Duration
Other related parameters—Beep tone
Note
frequency in hz, the length of the beep
tone (called duration), and how often
the beep tone plays (called
interval)—are defined on a per-Network
Locale basis in the xml file that defines
tones. This xml file is usually named
tones.xml or g3-tones.xml.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
Table 4-15 describes the options on this menu.
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Device Configuration Menu
4-27