Cisco CP-7961G Administration Manual page 48

Cisco unified communications manager 8.0 (sccp and sip)
Table of Contents

Advertisement

Understanding Phone Configuration Files
If you configure security-related settings in Cisco Unified Communications Manager Administration,
the phone configuration file will contain sensitive information. To ensure the privacy of a configuration
file, you must configure it for encryption. For detailed information, refer to
Phone Configuration Files
a configuration file whenever it resets and registers with Cisco Unified Communications Manager.
A phone accesses a default configuration file named XmlDefault.cnf.xml only when the phone has not
received a valid Trust List file containing a certificate assigned to the Cisco Unified Communications
Manager and TFTP.
If auto registration is not enabled and you did not add the phone to the Cisco Unified Communications
Manager database, the phone does not attempt to register with Cisco Unified Communications Manager.
The phone continually displays the "Configuring IP" message until you either enable auto-registration
or add the phone to the Cisco Unified Communications Manager database.
If the phone has registered before, the phone will access the configuration file named
SEPmac_address.cnf.xml, where mac_address is the MAC address of the phone.
The TFTP server generates these SIP configuration files:
SIP IP Phone:
Dial Plan—<dialplan>.xml
Softkey Template—<softkey_template>.xml
The filenames are derived from the MAC Address and Description fields in the Phone Configuration
window of Cisco Unified Communications Manager Administration. The MAC address uniquely
identifies the phone. For more information refer to Cisco Unified Communications Manager
Administration Guide.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
2-6
in Cisco Unified Communications Manager Security Guide. A phone requests
For unsigned and unencrypted files—SEP<mac>.cnf.xml
For signed files—SEP<mac>.cnf.xml.sgn
For signed and encrypted files—SEP<mac>.cnf.xml.enc.sgn
Chapter 2
Preparing to Install the Cisco Unified IP Phone on Your Network
Configuring Encrypted
OL-21011-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents