Table of Contents
Advertisement
Managing Software
1. In the
2. When the check is complete for the selected device or devices, close the Check
An updated list of all currently installed software is displayed in the
Deployment | Devices | Installed Software
software package, information is displayed in the Managed Package and Deployment
Group columns.
Add software package to deployment group
Prerequisites for this task are as follows:
Use the following procedure to add one or more software package installation les to
the deployment group that contains the devices in the following list. Depending on
your system design, you might not have all of the device-types listed:
Identify and add software package installation les as follows:
Software
Aurora Suite
Aurora Edit LD
NewShare
Conform server
Grass Valley Windows Monitoring SNMP
agent
72
Aurora Edit Installation Guide
Software Deployment | Deployment Groups
node for the group or any individual device and select
NOTE: If you have access problems, verify that the adminstrator account on
the device has credentials as currently con gured in SiteCon g. By default
credentials on the device should be administrator/adminGV! for Aurora devices
and Administrator/adminK2 for K2 devices.
The Check Software dialog box appears. SiteCon g searches for software on
the selected device or devices and gathers information. Progress is reported.
Software dialog box.
You can access the software package le from the SiteCon g control point PC.
The devices to which you are deploying software are in a deployment group.
Aurora Edit Workstation
Aurora Edit LD computer
DSM
Conform Server
SmartBin Server
FTP Server
tree view, right-click the top-most
Check Software
list view. If software is a SiteCon g managed
File name
x.x.xxx
AuroraSuite_
x.x.xxx
AuroraEditLD_
x.x.xxx
NewsShare_
.cab
x.x.xxx
ConformServer_
x.x.xxx
PCMonitoring_
.
Software
.cab
.cab
.cab
.cab
4 October 2010
Advertisement
Table of Contents
