Table of Contents
Advertisement
Related Links
Discovering devices with SiteConfig
4 October 2010
Setting credentials for a speci c device
Prerequisites for this task are as follows:
The Ethernet switch or switches that the support the control network are con gured
and operational. If multiple switches, ISLs are connected and trunks con gured.
The control point PC is communicating on the control network.
There are no routers between the control point PC and the devices to be discovered.
Devices to be discovered are Windows operating system devices, with SiteCon g
support installed.
Devices are cabled for control network connections.
1. Open SiteCon g on the control point PC.
2. In the toolbar, click the discover devices button.
The Discover Devices dialog box opens.
A list of discovered devices is displayed.
3. Click
to re-run the discovery mechanism. You can do this if a device that
Rescan
you want to discover has its network connection restored or otherwise becomes
available. Additional devices discovered are added to the list.
on page 54
Aurora Edit Installation Guide
Con guring the network
47
Advertisement
Table of Contents
