Table of Contents
Advertisement
Con guring the network
Setting Up the Host Table
The host table is a le that resides on the Aurora Edit workstation, which resolves the
name of each Aurora Edit workstation with its IP addresses. Aurora Edit uses this le
to verify that clips are sent across the proper network.
Use this topic if you choose to manage your hosts les manually.
A sample hosts le looks like this:
To set up a hosts le, do the following:
1. Open the following le using Notepad, or some other text editor:
2. Enter text in a single line for each Aurora Edit workstation and K2 server on your
3. Save the le and close the text editor.
58
Aurora Edit Installation Guide
The current hosts le is overwritten with the hosts le as de ned in the
system description.
C:\WINNT\System 32\Drivers\etc\hosts
network, as follows:
Type the IP address, then use the TAB key or Space bar to insert a few spaces.
Then type the device name, such as AuroraEdit1 followed by the characters
_FC0 for Fibre Channel or _HE0 for Gigabit Ethernet.
4 October 2010
Advertisement
Table of Contents
