Table of Contents
Advertisement
Con guring the network
Assigning discovered devices
Prerequisites for this task are as follows:
1. If the Discovered Devices Dialog box is not already open, click the discover devices
2. Identify discovered devices.
3. To also view previously discovered devices that have already been assigned to a
4. In the row for each discovered device, view items on the Device Id drop-down list
5. In the row for a discovered device, click the Device Id drop-down list and select
6. When discovered devices have been assigned, click
7. In the
48
Aurora Edit Installation Guide
Devices have been discovered by SiteCon g
Discovered devices are not yet assigned to a device in the system description
The system description has placeholder devices to which to assign the discovered
devices.
button
.
The Discover Devices dialog box opens.
If a single device is discovered in multiple rows, it means the device has multiple
network interfaces. Choose the interface that represents the device's currently
connected control connection. This is typically Ethernet ... 0.
If necessary, select a device in the list and click
on the device, such as ashing an LED or ejecting a CD drive, to identify the
device.
device in the system description, select
The currently assigned devices are added to the list. Viewing both assigned and
unassigned devices in this way can be helpful to verify the match between
discovered devices and placeholder devices.
to determine the match with placeholder devices, as follows:
If SiteCon g nds a match between the device-type discovered and the
device-type of one or more placeholder devices, it displays those placeholder
devices in the list.
If SiteCon g does not nd a match between the device-type discovered and the
device-type of a placeholder device, no placeholder device is displayed in the
list.
the placeholder device that corresponds to the discovered device.
If there is no corresponding placeholder device currently in the system
description, you can select
assign the discovered device to it.
Network Configuration | Devices
you assigned a discovered device.
ID Device
Show
currently assigned devices
to create a new placeholder device and then
Add
tree view, select each of the devices to which
. This triggers an action
.
to save settings and close.
OK
4 October 2010
Advertisement
Table of Contents
