GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual page 106

Aurora Edit Application Con guration
Setting
Output Channels
Digital Reference
Level
Default Mix
Undo/Redo Limit
Output Channels
106 Aurora Edit Installation Guide
Options Description
1-16 Select the number of output channels to use in your
sequence; con gure panning and routing from via
settings.
Mix
-20, -18, Select the preferred dBFS level, which is indicated on audio
-12 meters with a blue tick mark. This setting does not alter
recorded audio in any way; it moves the reference level so
editors in different regions can ride audio at their preferred
level of headroom.
Con gures pan control and channel routing for each
track of the Timeline.
1. Click
Settings
2. Select Monitor Mix
Monitor Mix
for speakers in the edit bay, and does not affect
sends to the server, play to tape, or live playout.
Output Mix
for the actual sequence output for playout.
3. Set the pan control by dragging the pan slider for an
audio channel to the right or left position; alt-click on
a pan slider to set the pan direction to center. By default,
odd-numbered channels pan to the left and
even-numbers channels pan to the right. Changing the
pan direction affects the entire track in a sequence.
4. Route audio channels by selecting speci c channels
(
1+2, 3+4, etc
Default routing for two-channel systems is as
follows:
Left >> Channel 1
Right >> Channel 2
Center >> All channels
If you have more than eight audio tracks, click the
Bank Select arrow to access the additional tracks on
Bank 2.
Enter the amount of preroll to play on a clip prior to playing
the edit you re reviewing.The default Edit Duration is 3
seconds.
1-1024
Enter the number of undo levels to track; 32 is the
default.
NOTE: Increasing the number of undo levels increases
Aurora Edit's system memory usage.
.
or Output Mix .
controls panning and channel output
controls the panning and channel output
.) or .
All
Default
4 October 2010