Table of Contents
Advertisement
Managing Software
Install and configure software on a NewsShare System
Do not do these tasks if:
Do these tasks if:
You must install and con gure software as instructed by the following tasks for these
Aurora Edit device types.
Prerequisites for these tasks are as follows:
For shared storage Aurora Edit devices, you must use a speci c sequence of installation and
con guration tasks. The installation sequence is summarized as follows:
1. Install the software necessary for connection to shared storage on Aurora Edit
2. Map the storage volume one of the following ways:
3. Install Aurora Suite software.
Use the following tasks to accomplish this sequence.
Install storage software on shared storage devices
1. In the
2. For the software you are installing, select the
76
Aurora Edit Installation Guide
SiteCon g copies the options you set for the rst device and lls in the blanks
on the wizard.
You do not have any shared storage (NewsShare) Aurora Edit systems. Skip to the
later task to install software on other Aurora Edit devices.
You have shared storage (NewsShare) Aurora Edit Workstations.
You have one or more Conform Servers.
You have SmartBins that require access to the shared storage and the SmartBin
server that is not one of the above device.
The devices to which you are deploying software are in a deployment group.
Prerequisite les are installed on the control point PC.
You have recently done the SiteCon g "Check Software" operation on the devices
to which you are deploying software.
devices.
If NAS storage, mount the NAS volume on Aurora Edit devices.
If K2 SAN storage, add all SAN connected devices to the SAN using K2 Con g.
Software Deployment | Deployment Groups
group of devices to which you are deploying software.
The corresponding software deployment tasks are displayed in the Tasks list
view.
install task.
tree view, select the device or the
check box in the row for the
Deploy
4 October 2010
Advertisement
Table of Contents
