Set Credentials - GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual

Table of Contents

Advertisement

Con guring the network
7. Restart each Aurora Edit LD device on which the script was successful.
8. For each Aurora Edit LD workstation on which the script was unsuccessful or for
Related Links
Adding Aurora Edit LD workstations for software deployment
About software deployment on the corporate LAN

Set credentials

1. At each local device, view the Windows administrator user account and verify that
2. If necessary, change credentials so they match on the device and in SiteCon g,
46
Aurora Edit Installation Guide
which the deployment preparation script is unsuitable, install the Connectivity Kit
on the device and con gure as follows:
a) From the directory at which the SiteCon g application is installed on the control
point PC, copy the contents of the
b) Run
and install the software.
setup.exe
c) Check rewall settings on the Aurora Edit LD device as follows and con gure
if necessary. The deployment preparation script con gures the Windows rewall,
so for devices using the Windows rewall on which you have run the script,
these settings should already be con gured.
Turn on the le and printer sharing ports - TCP 139, 445, UDP 137, 138.
Turn on remote desktop - TCP 3389.
d) Restart the Aurora Edit LD workstation.
the credentials are the same as those that SiteCon g uses to access the device.
SiteCon g is pre-con gured to use the following default credentials to access
devices:
Device type
All K2 devices
All Aurora Browse
(MediaFrame), Edit,
Ingest, and Playout
devices
using one of the following methods:
Change the device's credentials to match the credentials that SiteCon g uses
to access the device. This is recommended for most K2 and Aurora devices.
If your security policies prohibit changing the device's credentials, such as on
Aurora Edit LD workstations on the corporate LAN, in SiteCon g change the
credentials that SiteCon g uses to access the device.
ConnectivityKit
on page 35
Username
Administrator
Administrator
directory to the device.
on page 53
Password
adminK2
adminGV!
4 October 2010

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aurora editAurora ld

Table of Contents