GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual page 37

4 October 2010
The system description contains a group.
1. In the
Network Configuration | Devices
.
Device
The Add Device dialog box opens.
2. Con gure settings for the device you are adding as follows:
Family Select
Aurora
Type Select the appropriate type of Aurora device.
Model Select the appropriate model.
Name This is the device name, as displayed in the SiteCon g device tree view
and device list view. This name can be different than the host name (network
name). You can accept the default name or enter a name of your choice. Devices
in the tree view are sorted alphabetically.
Amount You can add multiple devices, as currently de ned by your settings
in the Add Device dialog box. An enumerator is added to the name to create a
unique name for each device added.
Control network Select the control network.
Starting Address Select from the list of available addresses on the selected
control network. If adding multiple devices, this is the starting address, with
addresses assigned sequentially to each device added.
3. Click to save settings and close.
OK
4. Repeat these steps for each of your devices.
tree view, right-click a group and select
.
Con guring the network
Add
Aurora Edit Installation Guide 37