Distribute Devices Into Deployment Groups - GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual

Distribute devices into deployment groups

4 October 2010
6. Deploy the following tasks:
Deploy Managed Package
K2-Aurora FTP x.x.x.xxx
K2-Aurora FTP x.x.x.xxx
7. Click the
Start Deployment
8. When the Status or Details columns indicate next steps, identify the software in
the row, then do one of the following:
For K2 software, when Details displays a
and when prompted "...are you sure...", click
If the Details column does not prompt you, restart the K2 Media Server manually.
The K2 Media Server restarts. This restart is required.
9. On the K2 Media Server, to enable port range limits for passive transfers, create
the following two DWORDs in the registry at
HKEY_LOCAL_MACHINE/SOFTWARE/Grass Valley Group/Streaming/:
FtpPasvStart (starting port number, inclusive : DWORD)
FtpPasvEnd (ending port number, inclusive : DWORD)
10. Open MediaFrame Con guration and for the News MDI, con gure the transfer
server to the K2 Media Server that is your K2-Aurora FTP server.
You can gather devices of different types into a SiteCon g deployment group. This
allows you to deploy software to all the devices in the deployment group at the same
time, as part of the same deployment session. Based on the roles you have assigned
Action
Uninstall (if upgrading K2-Aurora
FTP)
Install
button.
Restart required
Yes
Managing Software
link, click the link
.
Aurora Edit Installation Guide 69