Table of Contents
Advertisement
Installing SiteConfig support
4 October 2010
Software that meets these requirements is bundled in various components and
installation programs, some of which are available at your SiteCon g install location
as follows:
The
ConnectivityKit
of this folder to a device and then run
The
DiscoveryAgent Setup
You can copy the contents of this folder to a device and then run
install the software.
Use this topic to verify and, if necessary, install SiteCon g support software so that
the device can be discovered and managed by SiteCon g.
For Aurora Edit LD, do not use this topic. Instead, skip ahead and use the next topic.
1. Open the Windows Services Control Panel and look for the following required
item:
ProductFrame Discovery Agent
2. Open the Windows Add\Remove Programs Control Panel and look for the following
required item:
Microsoft .NET Framework 2.0 Service Pack 2
3. Proceed as follows:
On Aurora product devices, if the ProductFrame Discovery Agent at a version
lower than 1.1.0.185 is installed, use the Windows Add\Remove Programs
Control Panel and uninstall it. On these devices you must uninstall and then
install version 1.1.0.185 or higher, as instructed in next steps.
NOTE: The Discovery Agent can be named the ProductFrame Discovery
Agent, the SiteCon g Discovery Agent, or the SiteCon g Network
Con guration Connect Kit.
On other devices, if the ProductFrame Discovery Agent is already installed,
you can leave it installed as is.
On all devices, if either the ProductFrame Discovery Agent or .NET is not
installed, install the required software as instructed in next steps.
4. Navigate to your SiteCon g les or to the SiteCon g install location.
5. To install the ProductFrame Discovery Agent Service do the following:
a) Copy the
Discovery Agent Setup
b) In the
Discovery Agent Setup
DiscoveryAgentServiceSetup.msi
folder contains Microsoft .NET. You can copy the contents
setup.exe
folder contains the ProductFrame Discovery Agent.
subdirectory to the device.
directory, double-click the
le.
Con guring the network
to install the software.
setup.exe
Aurora Edit Installation Guide
to
43
Advertisement
Table of Contents
