Preparing for installation
Aurora Edit installation checklists
Use the following sequence of checklists to guide the overall task ow of installing
and commissioning an Aurora Edit system.
Optional equipment checklist
Use items in this checklist as appropriate for the optional equipment you are installing
in your Aurora Edit workstation.
Network setup and implementation checklist
12
Aurora Edit Installation Guide
Task
Install video board and
breakout box
Connect audio/video cables
to breakout box
Connect audio mixer
Connect video tape
recorder
Connect jog/shuttle
controller
Connect motorized fader
or effects controller
Assign Com Port
(Windows)
Assign Com Port (Aurora
Edit)
Next: Network setup and implementation checklist
Task
If you have not already
done so, add your storage,
either K2 SAN or NAS, to
the system description
If you have not already
done so, con gure your
storage, either K2 SAN or
NAS, and verify that it is
operational.
Instructions
Instructions
Refer to the K2 SAN
Installation and Service
Manual. For NAS, follow
procedures for K2 Nearline
SAN.
Comment
Comment
Modify your existing
system description.
4 October 2010