Table of Contents
Advertisement
Setting deployment options
4 October 2010
Depending on the K2 software version of your K2 SAN, also add software package
installation les as follows:
NOTE: Add les for either 3.x OR 7.x. Do not add les for both 3.x AND 7.x.
If your devices access storage on a K2 software version 3.x K2 SAN, add software
package installation les as follows:
Software compatible with 3.x K2 SAN
Generic iSCSI client for 32 bit systems
GVG MLib
SNFS is bundled with the Generic iSCSI cab le.
If your devices access storage on a K2 software version 7.x K2 SAN, add software
package installation les as follows:
Software compatible with 7.x K2 SAN
Generic iSCSI client for 32 bit systems
GVG MLib
1. In the
Software Deployment | Deployment Groups
group.
2. Click the
button.
Add
The Add Package(s) dialog box opens.
3. Do one of the following to select the software package:
Select from the list of packages then click
Click
, browse to and select the package, then click
Browse
4. If one or more EULAs are displayed, accept them to proceed. If you do not accept
a EULA, the associated software is not assigned to the deployment group.
SiteCon g adds the package to the deployment group.
The package appears in the Managed Packages list for the selected deployment group.
SiteCon g creates new software deployment tasks for the package and displays them
in the Tasks list view.
Pre-requisites for this procedure are as follows:
A software package has been assigned to the deployment group and applicable
deployment tasks are now displayed in the Tasks area.
1. In the
Software Deployment | Deployment Groups
group.
File name
3.x.xxx
GenericISCI_x86_
3.x.xxx
GVG_MLib_
.cab
File name
7.x.xxx
GenericISCI_x86_
7.x.xxx
GVG_MLib_
.cab
tree view, select a deployment
.
OK
Open
tree view, select a deployment
Aurora Edit Installation Guide
Managing Software
.cab
.cab
.
73
Advertisement
Table of Contents
