GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual page 33

4 October 2010
The Networks page displays a list of networks that are de ned for the selected
site model. Each of these networks is based on a network model that de nes the
type, usage and redundancy of the network. When the New Site Wizard creates
a network, it is based on this model.
5. Remove the control network and the streaming network.
Since child sites inherit the networks de ned at their parent(s), if the site you
are creating has a parent site that already contains one of the displayed networks,
then it is not necessary to include that network here.
The parent site of the NAS is the site that contains your K2 SAN, and it already
has a control network and a streaming network.
6. Click .
Next
The Devices page opens.
The Devices page shows you the device models that typically comprise a site
based on the model you chose in the rst page of the New Site Wizard. The
New Site Wizard creates these devices as part of the site. You can then modify,
remove, or you add devices, including device models that are not shown on this
page.
7. You can select a device model and do one or more of the following:
Con guring the network
Aurora Edit Installation Guide 33