Table of Contents
Advertisement
Aurora Edit Application Con guration
Setting
Default Bin Location
Prompt Before Deleting
Items
Use Tape ID for Capture
Use Proxy Media for
XDCAM Preview
Options—Media Locations (Aurora Edit LD)
Use this tab to set the media locations required for the NAS server for Aurora Edit
LD.
96
Aurora Edit Installation Guide
Description
services. When unselected, web calls through MediaFrame
services will bypass the con gured settings.
Enter the default path to your low resolution media les. You
may use the
Browse
button to locate the server. Do not use
the same directory as Aurora Edit ( V:\VibrintAVFiles is this
is default high resolution location for Aurora Edit). The Z:\
drive is used in this example.
Select this checkbox to receive a con rmation prompt before
deleting les. The setting is on by default.
Select this checkbox to identify which source tape a particular
clip came from; used in the Source Tool. This setting is off
by default.
Select this checkbox to view the low-resolution proxy for
media when previewing XDCAM les; doesn t affect HD
media, which always uses proxy media for previewing. This
setting is on by default.
4 October 2010
Advertisement
Table of Contents
