Removing An Http Compression Performance License - Cisco ACE-4710-K9 Administration Manual

Chapter 3 Managing ACE Software Licenses
Step 7
Note
Step 8
Step 9
Step 10

Removing an HTTP Compression Performance License

OL-11157-01
Copy the Admin running configuration to the startup-configuration file. For
example, enter:
host1/Admin# copy running-config startup-config
If you do not update the startup configuration with the latest running
configuration, when the ACE restarts, it uses the startup configuration with the
extra contexts. The ACE allows the number of contexts that the license supports,
but fails the remaining contexts.
Access the user context, and copy its running configurations from the remote
server. For example, to copy the C1 user context running configuration from the
TFTP server, access the C1 context and enter:
host1/C1# tftp://192.168.1.2/R-CONFIG-C1 copy running-config
Copy the user context running configuration to the startup-configuration file. For
example, enter:
host1/Admin# copy running-config startup-config
Repeat Steps 8 and 9 until you retrieve the running configurations for all user
contexts configured in the Admin configuration.
To remove an ACE HTTP compression performance license, use the license
uninstall command in Exec mode from the Admin context. The current
compression capability and type of compression licenses currently installed on
the ACE determines which license you can remove.
installed compression license on the ACE and the remaining compression
capability after the license is removed.
Table 3-4 Compression License Removal
Current compression
capability
100 Mbps (default)
500 Mbps
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Applicable licenses
Not applicable
ACE-AP-C-500-LIC
Removing a License
Table 3-4 lists the currently
Results of license
removal
—
100 Mbps
3-13